Itel A11 firmware flash file without password (SP7731CEB 6.0 PAC)

Waiting for your Itel A11 firmware device to be made with the latest version of Android – except for a few exceptions – can be exasperating. First, you must cross your fingers so that the manufacturer decides to update it. Then wait for the update to be ready and. Finally, to extend it to your region and operator. Here, we present Itel A11 firmware flash file without the password. download itel a11 firmware | flash file | pac file. Mrt dongle latest setup

Must Read including For Itel user.

Find and download the Itel A11 firmware

There are several websites that automatically collect the firmware. All are published by Itel on its servers. This firmware are official, without any modification. Once installed will continue to be shown as official firmware, without root and other stories.

The database is huge and includes all the models of Itel devices that have been and have been. Now, you need to make sure of the exact model of your device. So, as not to end up downloading firmware for a similar model. For example, Itel A11 is distributed in more in quantity. If you have good eyesight, the easiest way to check is to read the tiny letter on the back of the phone.

The same information is available in the system, in Settings – About the device, in the section Model number. It is important that you check the exact model because the difference between them can be as subtle as a letter or an additional zero. itel a11 flash file without password. itel a11 hang on logo solution file.

Connect the cable to the PC

Connect the device to the PC using a USB cable that is legit. There are many bad cables out there, and you would not want to be disconnected in half leaving your phone dull. It is also important that you have a sufficient amount of battery, such as more than half. Itel A11 drivers

Load the Itel A11 firmware

In flash software, one of the boxes below ID: COM should light blue indicating that it detects the connected mobile or tablet. If so, press the AP button to choose the firmware you unzipped somewhere on your hard drive.

The first time you do the system will check the integrity of the file with the MD5 hash check. Do not despair if you seem to be blocked for a minute.

Itel A11 firmware flash file without password (SP7731CEB 6.0 PAC)

Version info:Itel-A11-V014-20170428-6.0

Download Itel A11 firmware

Check the options

The standard configuration of Itel A11 flash tool is enough to install the firmware. It never hurts to do a manual check in case the flies. Go to the options tab of the screen and verify that the only thing that is activated is Auto Reboot and F. Reset Time. The most important thing is that Re-Partition is not marked.

To flash!

It is done. Take a deep breath and press the Start button. Do not fear; everything will be fine. You will be shown the progress in both devices with a progress bar below the Android dummy.

The Itel A11 firmware process will take a couple of minutes, and then the device will restart automatically. We had left the Auto Reboot option checked. The first time it starts with a new version of Android takes a long time.

Finally,

You know that your Itel A11 device already has a new version. But you are tired of giving it to look for updates and tell you that you already have the latest version of the system. There is still something you can do: update the firmware by yourself. Your terminal is not tied to any specific network.